• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
VW T4 parking camera 3D Printer File Image 1
VW T4 parking camera 3D Printer File Image 2
VW T4 parking camera 3D Printer File Image 3
VW T4 parking camera 3D Printer File Image 4
VW T4 parking camera 3D Printer File Image 5
VW T4 parking camera 3D Printer File Image 6
VW T4 parking camera 3D Printer File Thumbnail 1
VW T4 parking camera 3D Printer File Thumbnail 2
VW T4 parking camera 3D Printer File Thumbnail 3
VW T4 parking camera 3D Printer File Thumbnail 4
VW T4 parking camera 3D Printer File Thumbnail 5
VW T4 parking camera 3D Printer File Thumbnail 6

VW T4 parking camera

RH3D avatarRH3D

January 11, 2023

printables-icon
DescriptionCommentsTags

Description

Fixture to install parking camera in VW T4.

Camera is placed inside of the car (on the upper side of tailgate) so it isn't affected by rain/snow etc and you can see wider angle than if it was placed above the registration plate as it usually is. Disadvantage is that you actually don't see the very end of your car so you can't park like milimeter close but the viewing distance is very close so it is perfectly usable.

I use it with wifi camera that connects to smartphone but it will work with any other that fits inside - dimensions 23 x 23 mm.

The printed part has 3 slots for magnets d10 x 4 mm (I used 10x3mm) and the camera is pressed inside. There are also two positioning pins that will fit into holes already present in your car and will ensure the camera is placed in the middle of the car.

For cable management I recommend using ziptie anchors and tracing the cable through car chasis down to one of the tail lights.

No supports needed.

Ziptie anchor: Ziptie anchor 2x2 cm od autora radkoko | Stáhněte si zdarma STL model | Printables.com

No-Ziptie anchor: NO-ziptie cable anchor 2x2 cm od autora radkoko | Stáhněte si zdarma STL model | Printables.com

License:

Creative Commons — Attribution — Noncommercial — Share Alike

Related Models

Thor Mjolnir Hammer Bic Pen preview image

Thor Mjolnir Hammer Bic Pen

effektz profile image

effektz

9,085

Diverse Schilder / various labels  for hobby & makers preview image

Diverse Schilder / various labels for hobby & makers

RPK profile image

RPK

2

Customizable EU License Plate Keychain preview image

Customizable EU License Plate Keychain

John_M profile image

John_M

32

Vorpal The Hexapod Walking Robot preview image

Vorpal The Hexapod Walking Robot

vorpal profile image

vorpal

4,982

MakerZ – Open Source 1/28 RC Drift Chassis by Fails & Makes | Açık Kaynak 1/28 RC Drift Şasisi preview image

MakerZ – Open Source 1/28 RC Drift Chassis by Fails & Makes | Açık Kaynak 1/28 RC Drift Şasisi

Fails&Makes profile image

Fails&Makes

Cacciavite Portachiavi - Scewdriver keychain preview image

Cacciavite Portachiavi - Scewdriver keychain

Butti Maker Studio profile image

Butti Maker Studio

23

Snap-Together Mini Minecraft Jack-O-Lantern with integrated LED preview image

Snap-Together Mini Minecraft Jack-O-Lantern with integrated LED

scottrlindsey profile image

scottrlindsey

4,448

Small Parts Storage Drawers - Organizer preview image

Small Parts Storage Drawers - Organizer

GT 3D Makers profile image

GT 3D Makers

29

8