LED Diffusor Coaster for Coacktail / Drink / Bottle

A drink/bottle coaster diffusor with simple LED lighting.
The goal was to construct a small housing for a LED sticker without support. I hope you like it.

It consists of a lid and bottom that are held together with a bayonet catch.

The LED lamp is available as a cheap sticker on the Internet.
I used this one:
https://www.amazon.de/gp/product/B07H3V8XH7/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 (no affiliate link)

The button cells can be easily replaced from the sticker.

The sticker is simply inserted and at the bottom is a cutout to turn on the light and mode.

These lights are also available in color. However, you can of course just print the coaster in the color you want to color the white light.

The condensation can be collected by the surrounding gutter.

I look forward to your feedback or even remixes. :)

Print instructions

Simply print with layer thickness 0.2mm in PLA and a 0.4mm nozzle without support.
It is best to use a good transparent PLA. On the pictures I used the Vanilla White Prusament PLA. However, any other transparent filament can be used.

A little tip to test the transparency:
I myself use filament swatches and so I can estimate very well with which thickness how much light shines through.