Galaxy Trucker Token Storage (Anniversary Edition)

You get 3 boxes, a central stick and a lid for the board game 'Galaxy Trucker Anniversary Edition'. The boxes hold all credits, energy stones, starting ship pieces, astronauts and cargo which are found in the Anniversary Edition of the game. Files to print: ("one", "two", "three", "stick", "lid"). You can also use "one__alternativeNoHoles" if you want a coin holder without holes.

You additionally get a small Box (only up to the 2nd level), with a shorter stick and a second lid. Files to print: ("one", "two", "SmallBox_stick", "SmallBox_lid")

All boxes and the lid are stacked using a central stick which rests in the first box. It is printed separately for stability reasons.

If you want to remove the boxes from the game, you pull on this central stick and all come out in one go.

The credits are easy to access and sorted by value. The other boxes are more generic but are well suited for the energy stones, astronauts and cargo cubes. Just put the boxes next to each other and you can start your game.

Have fun!
Please share your prints if possible :)

Update

October 2023: Included a stick with less wiggle, should stay in snugly. 
File: gtb_stick_with_less_wiggle.stl
Thanks to vaxxi for the the idea!

Print instructions

Print all parts. Put the stick into the first box with the holes: Put the smaller end into the middle hole in the bottom of the box.

The other boxes are centered on that stick.