December 15, 2022
Description
Low Poly Bunny Winter Edition
If you like it --> press like it :-)
Mixed my Bunny Low Poly Vase mode with the hat of my Cute Snowman 1 of 5!
Now the low poly bunny is ready for the cold season ;-)
In vase mode only 2 hours print time, arround 20g/7m of filament for a 144mm big print with 0.2 layer height an 0.8mm line width!
There are a normal print and a vase mode version. The difference is the pose of the hat, because at vase mode prints you cant use supports…
I added the slightly changed bunny model(in compare to the original model) and the hats that you can print it with dual extruder. I have no dual extruder, so i do not know if it works with this models. Would be nice to get a feedback.
At vase mode prints i recommend to print with a wider line width. It is without problems possible to print with a 0.4mm nozzle a line width of 0.6 to 0.8mm. Slightly increase the temperature.
You like the design of the hat? Print all of my cute snowmans and the christmastree hanger ;-)
If you like vase mode prints especially which are no vases, you can join our group https://www.printables.com/de/group/vase-mode-explorations-everything-but-vases-15zYdDQ/comments
Would be happy to see your makes!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Crazy3D
