December 25, 2022
Description
This is an easy to print/assemble Christmas sled kit card. you can make it for your own or as a gift. I have both the kit card stl and the individual pieces for the sled available.
3D PRINTING:
I printed this one with a 0.3mm layer height, but if you want you can print it with 0.2mm or lower. I used 15% infill.
It fits on a 220x220mm print bed. If the slicer says that it doesn’t fit, just lower the distance between the part and the skirt. (I used 5mm)
ASSEMBLY:
Normally you should be able to put this kit card together without glue. All the parts snap together. you can break or cut the parts loose from the frame.
here is a video on how to put the kit card together:
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
PrintThatBoii
