Batmobile 1989 - Replacement body for Open RC F1

I love the Open RC designed by Daniel Noree but I didnt just want the same car everyone else had. So I decided to design my own. And what car is more iconic than the 1989 Batmobile. Unfortunately when I deicided I wanted to design my own my skills were not up to the task of the 1989 version so I settled and designed the animated series Batmobile. After a few years of practice using Fusion 360 I decided to come back and tackle the design I really wanted and was able to produce the model you see now. 

This body is a completely replacement of the F1 body in the OpenRC without needing to modify the original chassis at all.

Please see the pictures included for print orientation and where to place supports.

You will also need 6 M3 nuts and bolts they can be as a short as M3x8 but anything longer will work. You will also reuse the bolts used to mount the original F1 body.

The front lights and back burner are very thin so if you would like you can add lights.

Since this a body for an RC car I would recomment to print with at least 3 perimeter walls and 15% infill or higher.

Do you like my work and would like to support it?

Become a Patron