Flipper zero wifi module organizer frame for Peli 1010 case

This organizer frame is designed to secure the Flipper zero wifi module inside a Peli 1010 case. 

The Flipper zero wifi board should also have a case like these ones to work with this model.

• https://www.printables.com/model/348239-case-for-flipper-zero-wi-fi-module-with-ruthex-thr
• https://www.printables.com/model/179910-case-for-flipper-zero-wi-fi-module-v1

Printing instructions :

• Material used: ASA, ABS or PLA (PETG tend to be difficult to glue)
• Layer Height: 0.2mm
• Infill: 20%

Assembly instructions:

1. After printing, sand a little bit the top of the printed parts if they are not completely flat.
2. Glue the three part together using a thin glue like superglue or a solvent (I printed my parts in ASA and glued them together with acetone for example).
3. Remove the foam inside the Peli 1010 lid if there is one inside.
4. Glue the assembly in the lid of the Peli 1010 case using epoxy glue or double sided tape.
5. Let it everything dry and enjoy!

Happy printing!