December 27, 2022
Description
An SD card or guitar pick holder in the style of a guitar neck. The items will be held in place with small clips. Due to the difference in thickness between sd cards and guitar picks, there are two versions: A tighter one for the picks (picks thinner than about 1mm might not be held down by the clip, but since i hate these picks i did not spend any time to change that :P ) and a looser one for sd cards.
If you have a choice, definitely go for a more elastic filament. If the material is to brittle, the clips may brake off.
Printed without supports.
Feedback is very welcome.
License:
Creative Commons — Attribution — Noncommercial
9
Matthias L
