You can adjust the phone stand in 3 positions by tilting the arm until it latches
Feel free to give feedback as I'm shure this little thing can be improved :)
Printing
- Standard print settings for your printer
- Print the parts laying on the sides as they are oriented in the STL files
Updates
- 6.1.23
updated both rework parts: STL files have the correct print orientation now - 31.12.22
reworked both parts:
- stronger latching
- added notch for charging cable
- added more slots for rigidity
- increased height by 10 mm for charging cable clearance - 29.12.22
updated both parts > adding slots to the base for rigidity and cleaned up some edges
spontaniel
