Here's my take on a 3D-printable way to display you propagation cuttings! Print the grid, the vial holder, and then maybe the bottom support if it's a larger or heavier vial. Currently there is only a 1in diameter hook, but I intend to make other sizes.
Happy Printing!
- Ty10y
Changelog:
30 Dec. 2022:
Changed Vial Holder to a rotating style, so now it can print easy with no support, then rotate into place once done.
Improved the Vial holder and Support to include geometry which “locks” in place when installed instead of falling out the back of the grid. It's also shorter making it easier to install.
Added a “V2” version of the grid that allows multiple grids to be tiled together to make a continuous wall of these hex grids.
Added #8 screw through-holes to the grid for easy mounting (0.17in/4.32mm).
Ty10y
