Rainbow for plants

Print for watering your plants. This has a cavity at the top to add water with a path for the water to fall from the clouds. Lightning anchors the print in your soil.

Thunder is provided by you.

Print instructions

I printed each color individually in PLA. The Lightning is a loose fit and I used a snip of the skirt to wedge it in the cloud. The Colors all fit well with just a friction fit. The Cloud base has holes and each color has pegs. The Colors use the bottom surface as the display side. Watch out for elephants foot. Assembly may need a little glue.

Water pours out very quickly. if you want to slow it down you might add a bit of cotton ball in the top of the water path.

Printed with a single Support Enforcer on the Cloud for the water cavity.