December 31, 2022
Description
This is a sturdy, heavy hanger for large bags, backpacks, and the like.
I use it for holding a 15+lb backpack. I have not destructively tested how much weight it can bear, but I believe it can easily hold double the weight of the backpack (estimated 30+ lbs).
This hanger is meant to be printed support-free in ABS. It is a long-lasting wall-installation that blends in with a normal home.
NOTE: The hangers in the photo were printed in ABS. I cannot guarantee how much weight they will bear with PLA+. I recommend against PETG due to its flexibility.
Printer Brand:
Creality
Printer:
Ender 5
Supports:
No
Resolution:
0.24mm
Infill:
30% Gyroid
Filament:
3DFuel ABSBlack
Notes:
Print with 5 or 6 perimeters and at least 1mm top/bottom. Most of the structural weight is borne by the walls, so they need to be thick. Printed weight should come out at over 200g.
License:
Creative Commons — Attribution
jonspaceharper
