3D Printer Spool Holder

Perfect if you want to eliminate vibrations from your printer. This is a homemade spool holder. You need 3 screws to fix it on a shelf or on the ceiling. Tested, works properly. Use two ball bearings to fit it in the perno_06.

Write to me for any questions or tips.

Thanks

Print instructions

PLA or ABS, 0.3 layers. Support needed. I printed "cuneo-06" horizontals because it is more strong, but you can try to print it vertically for quality.

29 Sept 2020:
Updated "tieni filo" with some improvement