Low profile, print in place, 60mm hinge.

Designed for box lids, this hinge is held in place with m3 bolts. It opens to around 90 - 120 degrees or so (depending on the bolts used).

Has 5mm "pins" with heavy chamfers, so it should be fairly robust.

Uses 3mm holes with 40mm spacing along the hinge, and 15mm across the hinge.

Print Settings

Printer Brand:

Wanhao

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Notes:

Print in place (so you'll need a well dialled in printer). Print it with the pins vertical. Tolerances are on the order of 0.2mm.

Category: Tool Holders & Boxes