LED Matrix Diffusor 8 x 8

A Diffusor for 8x8 RGB LED Matrix 

To be printed with two colors - Layers 0-3 with white PLA/PETG and the remaining parts using any other color you like. For best “pixels” a black frame is recommended.

You can also print the entire piece in white PLA/PETG but the pixels are then not as sharp as they are with a black frame.

For best results print it using a textured PEI plate - this gives you a nice even white surface

Alternative if you do not want to make a filament color change: Use the open frame and glue a piece of white paper onto the front.