October 8, 2023
Description
Cute and simple glasses holder, perfect for kids or any animal lover.
Specially designed to fit in the buildplate of any mid size printer, like ender 3 or similar.
The base is one piece. and every color is a separated file so you can print it in different colors with a single nozzle.
All the pieces of same color are grouped in its separated file. Just print all pieces and glue them in place.
First join all the pieces of the face and save the base for last. once ready add a few drops of glue in the hole of the base and press the face
NOTE: only the eyes need a filament change at height
Print Settings
Material: PLA / PETG
Layer height: 0,2
Nozzle diameter: 0,4mm or 0,6mm
Infill: 10 -12%
Perimeters: 2
Supports: no
You can check all my original models here:
________________________
If you like my designs and want to support me or sell physical prints, you can check out my patreon
https://www.patreon.com/meafdesigns
________________________
License:
Creative Commons — Attribution — Noncommercial
MEAFdesigns
