November 2, 2024
Description
Tired of your charging cables laying all over the place, tripping over them at night? Why are you in the garage in the dark, at night??
The ⚡EV Charger Holder J1772⚡ is designed to hold an at home Level 2 EV charging plugs and cables nicely on the wall.
*NOTE: I have tested this with my General Motors Level 2 J1772 charger. Some designs may vary, so please let me know if you have any questions or have suggested adjustments.
• Compact Design
• 2 screws stacked vertically for stud mounting
• Also holds the cable
• Also makes a great coat hanger
11/21/2023
• Increased opening Diameter by 1mm for better clearance across variable sizes of J1772 chargers. (Thank you for the feedback everyone)
• Increased height of cable holding tab slightly
• Screws: x2 wood self tapping countersunk screws
• Screw Driver / Power Drill
• Stud Finder
• I recommend installing the holder onto a wall stud if possible, otherwise use wall anchors to a solid hold.
• Hold the holder and screw the screw lol. Start with the top screw, adjust the hangers angle if needed, and install the lower screw.
PRINT SETTINGS
Filament: PETG
Nozzle Size: 0.4mm (3 perimeters), 0.6mm (2 perimeters)
Print Height: 0.2-0.35mm
Infill: 10-20%
License:
Creative Commons — Attribution
6
Jerrari
