Rook 3D Printer - Mods - 150mm glass bed holder

A simple glass bed holder for 150mm bed such as https://fr.aliexpress.com/item/4000174099081.html?spm=a2g0o.order_list.order_list_main.29.714d5e5bItXY5U&gatewayAdapt=glo2fra

There's a little compliant spring to pres the bed against the lip, and the front is open so that the glass can easily be removed

I found the VHB tape holding the bed caused a few issues:

• Adherence problem, I found it guite difficult to just make the glass bed adhere to the screw support with VHB tape
• Un-consistent height, the tape might be more or less squeezed
• Centering the glass bed is awkward
• Twisting resistance, adjusting the knob would often result in the tape/glass interface twising and ultimately failing

Use M5 blolts inside each pocket with the following stack:
M5 Bolt head / washer / spring / washer / rook's bed platform / washer / m5 nut
You can print a knob for the nut too