The Owl House

This is a model of the Owl House from the show of the same name.

The Model comes in 1:110 and 1:270 scales.

1:110 Scale

119mm long, 117mm wide, and 111mm tall. 

Print Instructions

The roof is printed separatetly to reduce supports. Everything was printed at 0.15mm layer height with supports on buildplate.

• “toh-house.stl” is the house without any of the roofs.
• “toh-roof_1.stl” is the roof above the front door.
• “toh-roof_2.stl” is the sloped roof to the right of the front door.
• “toh-roof_3.stl” is the roof at the back.
• “toh-roof_4.stl” is the front half of the main roof.
• “toh-roof_5.stl” is the back half of the main roof.

The file “toh-full.stl” contains the house with roof. Printing this version is not recommended, because it has a lot of overhangs.

1:270 Version

55mm long, 51mm wide, and 46mm tall. The model was slightly modified to eliminate thin pieces.

Print Instructions

Printed at 0.7mm layer height. No supports required, because I've added supports manually to the model.

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#

[UPDATE 2023-04-21] New Photos

[UPDATE 2023-07-14] Added 1:270 Version

[UPDATE 2025-01-14] Added Tower