January 20, 2023
Description
Orange pi zero mount for Voron Switchwire
Mounting bracket designed for mounting an Orange Pi Zero to the frame of a Voron Switchwire or Ender 3 (pro).
Required material per hinge:
4x Self tapping screw SHCS M3x10.
2x Bolt BHCS M5x10.
2x T hammer nut M5.
+- 6.5 grams PLA, ABS or ASA. (ABS recommended).
Recommended print settings:
Material: ABS.
layer height recommended: 0.2mm.
Extrusion width recommended: Forced 0.4mm.
Fill Type: Grid, Gyroid, Honeycomb, Triangle or Cubic.
Infill percentage recommended: 40%.
Wall count recommended: 4.
Solid top/bottom layers recommended: 5.
Printable without support!
→ Please follow more designs soon !!! ←
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Scops Owl Designs
