Extrusion Clip for Articulating Pi Camera Arm

**Had to edit this (Aug. 9) earlier version would hit the linear bearings if you placed the clip on the Y axis extrusion.

A simple double remix mash-up that combines the extrusion clip of one design with the articulating arm of another.

I really liked the idea of simply clipping my Pi camera arm to the extrusion of my Prusa Mini (like in this design https://www.prusaprinters.org/prints/25205-flexi-arm-camera-mount/comments) but liked the articulating in this design https://www.prusaprinters.org/prints/3407-articulating-raspberry-pi-camera-mount-for-prusa-m/comments so this is an extra little accessory that clips to the extrusion of your printer (Prusa Mini, but works on MK3 or 2 too I think) and fits with the articulating arm pieces linked above.

Print instructions

0.2mm in either PLA or PETG, needs to flex so can be up to full infill with PETG or 3 perimeters and 15% infill with PLA. I suggest laying on its side and using supports.