January 31, 2023
Description
This support foot can take some of the weigh that may be overstressing you book shelfs or other kind of furniture. It can of course also be used as a spacer for all kind of other parts. The original design was made to range from 25 to 38mm (one inch to one and a half inch) in height. For those of you that need a greater height, I have added one very long screw rod and a picture that shows how you can cut it to the length you need in PursaSlicer.
The thread is a regular metric M16 thread. I have taken care to make the 3D printed parts compatible to metal M16 rods and nuts. Do whatever comes to your mind with this ;-)
Printing is very simple, just print the parts in the uploaded orientation with a good number of perimeters (4-5) to make them very strong on the thread. An infill of 25 percent proved to be good enough for my application (which required around 25kg). If you have a very heavy piece of furniture, you may want to print with 100% infill.
Your satisfaction is my reward. Please give me a like or post a picture if you like this design.
License:
Creative Commons — Attribution — Noncommercial
HD_Creator
