January 28, 2023
Description
Hi !
Your Prusa Mini and Mini+ has problems with the Y axis... check the belt tension.
The part that connects the belt to the heating plate tends to let the belt slip... tooth after tooth...
In fact the piece is not strong enough to hold the belt properly.
I redesigned the part to be very strong :)
This part use the originals screws.
The original Gates Belt is a glass fiber belt GT2 6mm
https://s.click.aliexpress.com/e/_9QNIMW
When adjusting the belt on the new part :
!!! The spacing should not be excessive or the hotbed will hit the tensioner !!!
(as the original y belt holder), check picture.
If you like, like this part,
post your print
and thanks to tip me if you are very happy ;)
Happy printing !
Print Settings
Printer brand:
Prusa
Printer:
i3 MK3 MMU 2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50
Notes:
Cubic infill 50% is the strongest mechanical infill ;)
License:
Creative Commons — Attribution — Noncommercial
7
Renba
