IC PIN Straightening Tool for DIL (DIP) Integrated Circuit

Updated 08/05/2021 Part List Links

Hi

Appearing in this format in the 60's, many of the integrated circuits that we are still called to use are still in the good old DIL (or DIP, CERDIP, SPDIP,..) package.

We use them in this form because in the case for example optocouplers or transceivers, they are placed on support and their replacement is easy.

A small circuit easy to make on a prototype board will be even more if the components are in the traditional format.

Unfortunately, the storage of these components is delicate and often we have a hard job to do, straighten all the legs of the component we want to use.

So I designed this tool that allows in a split second to straighten all the pins of these precious components.

Here are the cheapest bearings...
http://s.click.aliexpress.com/e/cknelnSs

ABEC1 is enought for this application but if you want a rollroyce, you can use grade ABEC5 or more...
https://en.wikipedia.org/wiki/ABEC_scale

You need 3 wood screws M2.6mm x 8 like theses
http://s.click.aliexpress.com/e/b8K8kis0
and some washers adaped

Just add 4x 3M rubber foots on the bottom face

...and you will get a professional product

All I ask in return if you like this design is to post your achievement, I will be happy to see your print and to know how this tool is useful for you.

Happy printing !

Renaud

Print Settings

Supports:

Yes

Filament brand:

Any

Filament material:

Any

Notes:

Base 30% or less
Guide and Knob 50%

Support only for the "Guide" part.

Printing the base part with a conductive carbon filament is a must...