June 10, 2026
Description
The game consists of box, lid and 10 puzzle pieces. The lid has a small bump on the side that snaps into the box.
The puzzle pieces are used on both sides.
Although there are 1412 different solutions (not counting symmetric solutions), the puzzle is not easy to solve.
The size of the sliding top is crucial. If it's too narrow, the bumps on the top won't snap into place. If it's too wide, the top can usually still be inserted, but it becomes difficult to open.
If the top doesn't fit, it is advisable to adjust its dimensions in the slicer and reprint it. Recommended adjustments are only small increments ranging between approximately 0.2mm and 0.3mm in width (only in width).
Here is a short video explaining this
I printed the puzzle with the following settings:
Material: PLA
Resolution: 0.2mm
Infill: 20%
no supports
no raft, no brim
Further polyform puzzles and background
Liked this model? Check out my other polyform puzzles on Printables
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
Pentoma
