February 3, 2023
Description
I've modified the frame, struts, and axle to simplify part count, printability, and assembly. Main axle and cross struts now all use the same piece, which clips into the frame. M3 bolts are no longer needed for assembly
Axle clip is strong enough to support weight of 1kg spool, but can still be easily removed by using your finger to lift on axle near the clip on each side.
Two 608 style bearings per spool
Mine printed fully in Inland PETG - the cardboard spool also works very well for the rewinder as it adds friction to the axle.
License:
Creative Commons — Attribution — Share Alike
7
mcfada
