CW1 Prusa (Prusa Mate) & Pot Mate

This is not a MMU print. This prints in parts and is then glued together.

To see how to carry out filament changes mid-print, please refer to the link below.
https://help.prusa3d.com/en/article/color-change_1687

So say hello to the CW1 Prusa mate. The final installment towards the Prusa Mate series.... FOR NOW!!!

Open the lid to meet the cute and adorable Pot Mate and marvel at there cuteness and friendship. Let them play together and also with there fellow Prusa Mates. And when Pot mate gets tired at the end of the day, let him rest and sleep inside his best mate CW1.

Please refer to the print instructions below and assembly images.

To stay up to date with my designs and creations, please check out my instagram page.
https://www.instagram.com/neil3dprints/?hl=en

Happy printing!!! :-)

Print instructions

This is not a MMU print. This prints in parts in different colours and is then glued together.

To see how to carry out filament changes mid-print, please refer to the link below.
https://help.prusa3d.com/en/article/color-change_1687

Supports will be required for some of the parts.

I should point out I used Prusament galaxy black pla for the 'lighter black parts.' And a standard black PLA for the 'blacker black parts.'

if you only have access to one black pla brand, then you could try spraying the lid with a few layers of lacquer so it will have a brighter sheen compared to the other black parts.

Also, some of the parts are really really small. Sorry about that. Namely the Pot mates eyes and arms are tiny. For the arms you could try 1.75mm filament instead of the actual printed arms. Just make sure they are not too long.

To attach the lid to the frame please use 1.75mm filament through the holes as shown in the assembly image.

Any problems or questions, send me a message and I will get back to you when I can.

Happy printing!!!