February 12, 2023
Description
I designed the poker chips with OpenSCAD. If you want the source, send me a message and I'll share it with you. I will eventually add it here but I need to clean it up and fix a few bugs.
The poker chips are designed to be printed face down (text/engraving on the heat bed) to transfer the texture of the plate. They can also be printed face up but you will need to adjust the color change height. I tested the design with PETG and the textured sheet.
Archimedean chords top fill pattern (Prusa Slicer setting) gives a nice spiral finish on the back of the chips.
The dimensions of the samples chips are standard 39 mm by 3.5 mm and I included the most common values: 1, 5, 10, 20, 25, 100, 500, 100.
Recommended Print Settings:
| Layer height | 0.2 mm |
| Infill (Top fill pattern) | Archimedean chords |
| Color change at layer | 0.8 mm / 1.4 mm (when printing face down) |
| Recommended Colors | |
| Chip color | Value |
| White | 1 |
| Red | 5 |
| Orange | 10 |
| Yellow | 20 |
| Green | 25 |
| Black | 100 |
| Purple | 500 |
| Maroon | 1000 |
Color change instructions: Color change instructions: https://help.prusa3d.com/article/color-change_1687
License:
Creative Commons — Attribution
netpaq
