Redesigned 24 mm masking tape dispenser with magnetic mount and finger hole

This is a redesign of my previous tape dispenser. I have created a middle hole on it to be able to hold the dispenser on your thumb. The idea came from the diver's finger spool (in case if you are a diver I have an other nice model for you: https://www.prusaprinters.org/prints/13781-diver-spool )

24 mm masking tape is the perfect kitchen accessory for labelling food in the freezer. They don't come off easily. I'm using several rolls with different colours in the kitchen.

This tool is a tape dispenser with a built in hole to 10x10x4 or 10x20x4 neodymium magnets.

The magnets let you to store the tape spool on its dispenser on the fridge door.

Link to the design: https://a360.co/31DyIXp

Stats:

• printed with 0.2 mm layer height, 15% gyroid infill, 4 perimeters
• requires 17.7 m (=~45 g) filament.
• print time 3:40 on a Prusa MK2.5 on w/ 0.2 mm 100 mm/s linear advance profile