JST_SM 1x4 Skirt Connector (ADXL)

JST_SM 1x4 Skirt Connector (ADXL)

JST SM 1x4 Skirt Connector for Vorons. 
Can be used as a connection for an accelerometer, for example an MPU 6500 with i2c connection.

Recommended print settings:

Material: ABS.
layer height recommended: 0.2mm.
Extrusion width recommended: Forced 0.4mm.
Fill Type: Grid, Gyroid, Honeycomb, Triangle or Cubic.
Infill percentage recommended: 40%.
Wall count recommended: 4.
Solid top/bottom layers recommended: 5.

Printable without support

Disclaimer:
This is originally based on this mod for a Microfit 2x3 connector.
which has been modified on this mod, to not need supports and to fit a bit tighter on the connector.
I replaced the Microfit 2x3 connector for a JST_SM connector and made the design of this mod fit the jst connector.

→ Please follow more designs soon !!! ←