Shadow lamp

A lamp that will look amazing in your living room not matter the position or if it´s it turned on or off. It is based in a wood lamp I saw some time ago in Pinterest*, but it was adapted to be fully 3d printed, the parts were designed in a way it is easy to print them and assembly in fact you can laser cut the parts and it will work, just let me know if you need any modifications.

It is compatible with most of the traditional bulb sockets in the images I used a random socket I found somewhere and in the other I used the linked one that I found in the local hardware store.
*https://www.pinterest.com.mx/pin/53550683052529252/https://www.amazon.com/Leviton-10045-One-Piece-Incandescent-Lampholder/dp/B000LNOL1A/ref=sr_1_42?crid=172ARES89A9W0&dchild=1&keywords=leviton+bulb+socket&qid=1599243015&sprefix=levit+on+bulb+%2Caps%2C209&sr=8-42

Print instructions

Print in the provided orientation. Use PETG or ASA filament.

You can be creative with this design to make different shadows, for example some of the pictures shows the same lamp but with the parts printed with the honeycomb infill exposed, for this modifications, you can use the layer modification in PSlicer.