March 30, 2023
Description
The pictured print was done with 0.2mm layer height with grey SUNLU PLA+ filament. Note that the “fuzzy skin” feature was enabled in order to produce an organic texture.
By default, the pot has an approximate diameter of 3.75in (95mm) and a height of 3.25in (85mm). The central drainage hole has a diameter of 0.25in (6.35mm) and the smaller ones are each 0.2in (5.08mm). It can certainly be scaled to whatever diameter or height you are interested in.
If you like this design, consider leaving a tip! I'm a university student that designs planters on the side, so anything helps!
License:
Creative Commons — Attribution — Noncommercial
Jordan Proctor Designs
