Cartesian 3d Printer Coaster

 if you prefer the design as Core XY follow the link

Coasters as 3d printing plates and the storage box is a printer incredible for everyone who loves 3d printing

PRINTER
Print all parts in your desired color, the parts can be put together, but I recommend fixing all parts with superglue

!!! don't forget to slide the toolhead onto the spindles before mounting them on the frame !!!

if you print the version with the spool holder, you can connect the toolhead and the filament spool with a piece of filament, both of which have a hole for it

PLATES
here i have created different versions so that everyone can make their choice

The full plates are intended for when you want to work with a filament change at a height (M600) or have an MMU printer. The build plate and spring steel plate are combined here

or you can print the spring steel plate separately the buildplate of your choice and then connect them with superglue

the following buildplates are available

Standard - simply smooth, you could print in brown for a pertinax plate or in gold for a smooth Pei plate
 

Rough PEI - has a textured surface best printed in gold for the rough pei look (if you use a rough pei plate you can also just print the standard plate and then glue it upside down on the spring steel plate)

Carbon - well I did my best to get a reasonably good carbon pattern some might like it if you have any tips on how to do it better write to me (this plate has to be printed with a filament change)

All parts can be printed without support

my print settings

0.4 nozzle
0.2 layer height
3 perimeters
0.4 line width
0.32 line width top layer
20% infill (honeycomb)
5 top players
5 bottom layers