Core XY 3d Printer Coaster

if you prefer the design as Cartesian follow the link

Coasters as 3d printing plates and the storage box is a printer incredible for everyone who loves 3d printing

Print all parts in your desired color, the parts can be put together, but I recommend fixing all parts with superglue

!!! don't forget to slide the toolhead onto the gantry before mounting it on the frame !!!

for the assembly you need all parts from the printer parts folder you only need the toolhead once in the desired version (if you want to mount 2 toolheads you can print them in the desired version depending on how many filament rolls you want to use)

Assembled or Single Parts you choose
here you can choose how to print the core

in the assembled variant, the lead screw holders and motor cages are already mounted on the frame, as are the spool holders and display

If you want to make the whole thing a little more colorful, I recommend the single part version. Here you can print the motor cages, lead screw holders, etc. individually, but these must then be fixed with superglue

 

SPOOL
There are holes in the filament spool and in the toolhead that you can connect with a piece of filament. With the MMU variant you can use 4, with the dual 2 or 2 toolheads with 2 spools, depending on what you like

 

PLATES
here i have created different versions so that everyone can make their choice

The full plates are intended for when you want to work with a filament change at a height (M600) or have an MMU printer. The build plate and spring steel plate are combined here

or you can print the spring steel plate separately the buildplate of your choice and then connect them with superglue

the following buildplates are available

Standard - simply smooth, you could print in brown for a pertinax plate or in gold for a smooth Pei plate

Rough PEI - has a textured surface best printed in gold for the rough pei look (if you use a rough pei plate you can also just print the standard plate and then glue it upside down on the spring steel plate)

Carbon - well I did my best to get a reasonably good carbon pattern some might like it if you have any tips on how to do it better write to me (this plate has to be printed with a filament change)

All parts can be printed without support

my print settings

0.4 nozzle
0.2 layer height
3 perimeters
0.4 line width
0.32 line width top layer
20% infill (honeycomb)
5 top players
5 bottom layers