Spitter Plant lamp

If you are looking for a lamp with a Venus Flytrap esque vibes, look no further!

This is a Crash Bandicoot inspired lamp, which uses an e14 light bulb and a a cord set (standard ~27mm outer thread diameter, with a loose power cord as seen in one on the pictures). All parts print without any support.

The Base was weighted using plaster, but you can use what ever material you wish inside the two cavities on the base.

You can use what ever strong glue you wish, cyanoacrylate or epoxy are recommended.

There is file for testing the threads before printing the Head, make sure it threads in nicely to the bulb holder.

Be sure to do follow your county's laws and regulations for electrical work before doing any hardware connections!

Toss a like, post a make and maybe follow me over at the IG's or YT

https://www.instagram.com/superbeasti/

https://www.youtube.com/channel/UCjYzBKKl0BfKuw2VQgK8AQg

Print instructions

Putting one together is simple:

Print all parts with you favourite printer, Prusa right?
Paint the teeth of the head part white
Insert the weight on the Base and seal the cavities with glue (Left and right Covers)
Insert the power cord through the base and the Stem
Thread in the e14 lamp holder and connect the cord and strain relief to it
Glue the Stem to the Base
Glue the Head to the Stem
Glue the Base Center Cover
Form the leaves using boiling water (dip it in and bend to desired shape)
Glue the Leaves to the Stem
Insert the bulb
Done!