VW Corrado G60 logo front grill

18.may 2019
confirmed, eventually use PETG version, but personally I prefer ABS version

Still in development.
Not for commercial use.

Howdo: insert the upper part of the logo into the bottom and click the rods, use glue or hot iron.
If you need to use the drill bit or rasper to increase the holes in the bottom part (by hand, not electricity).

Logo G60 front grill for VW Corrado (1989-90 model i think).
I make one for my friend.
The original batch was used as a pattern for this

Printed from several materials, testing Creality PLA white / Gembird ABS black / Plasty Mladec PETG black. I recommend printing ABS (I also tested PETG, but ABS is clearly for this better).
Support for lower (bottom) part (ur choice).
Bottom version 02 has more support in brackets.

ABS prints on my Ender 3, without enclosure, i used Gembird ABS black, no smell, occasionally WARP (room temperature and around the printer, i suppose, who know, newbie in 3d print).

Print instructions

Unassociated tags: front batch

Category: Other Summary

18.may 2019
confirmed, eventually use PETG version, but personally I prefer ABS version

Still in development.
Not for commercial use.

Howdo: insert the upper part of the logo into the bottom and click the rods, use glue or hot iron.
If you need to use the drill bit or rasper to increase the holes in the bottom part (by hand, not electricity).

Logo G60 front grill for VW Corrado (1989-90 model i think).
I make one for my friend.
The original batch was used as a pattern for this

Printed from several materials, testing Creality PLA white / Gembird ABS black / Plasty Mladec PETG black. I recommend printing ABS (I also tested PETG, but ABS is clearly for this better).
Support for lower (bottom) part (ur choice).
Bottom version 02 has more support in brackets.

ABS prints on my Ender 3, without enclosure, i used Gembird ABS black, no smell, occasionally WARP (room temperature and around the printer, i suppose, who know, newbie in 3d print).

Print Settings

Printer Brand: Creality

Printer: Ender 3

Rafts: No

Supports: Yes

Resolution: 0.2

Infill: 15%

Filament: Gembird ABS Black
Notes:

Printed from several materials, on the photos of Creality PLA white and Gembird ABS black. I recommend printing ABS (I also tested PETG, but ABS is clearly for this better).

How I Designed This

how did I create it?

I used photos, caliper, original batch G60. Fusion 360, patience, several test prints for coloring and for different plastic properties - for testing.