Multifunctional hand watch bracelet

Hi
When my old strap watch broke I decided to make my own.
I thought it may have some additional functions.
That way my bracelet watch can contain full A4 sheet of paper with some informations or notes.
The dimensions of full A4 sheet are 297x210 mm. When you divide the shorter side by 7 mm you get 7 strips with dimensions 297x30 mm.
The full A4 sheet is contained in 7 Links, but can add more if you want
I designed it in Autodesk Fusion 360.
I printed it out of Taulman Bridge nylon on Original Prusa i3 Mk2S at local FabLab.
Support was genereted in Autodesk Meshmixer.
I did some post procesing like drilling holes, cutting them and support remove.
For connecting Links and Knobs you can use parts of 1.75 mm filament.
You can use some flexible filaments to add more flexibility
Printing settings were:
-printing temperature 255 C
-heated bed 75 C
-no cooling
-glue stick applayed on bed
-slow speeds
If I forgot about somting or you just want to ask me, post a comment and I will try to answer to you.

I hope you will enjoy it
If you want you can tip this project or check out my others designs
Thanks

Print instructions

Hi
When my old strap watch broke I decided to make my own.
I thought it may have some additional functions.
That way my bracelet watch can contain full A4 sheet of paper with some informations or notes.
The dimensions of full A4 sheet are 297x210 mm. When you divide the shorter side by 7 mm you get 7 strips with dimensions 297x30 mm.
The full A4 sheet is contained in 7 Links, but can add more if you want
I designed it in Autodesk Fusion 360.
I printed it out of Taulman Bridge nylon on Original Prusa i3 Mk2S at local FabLab.
Support was genereted in Autodesk Meshmixer.
I did some post procesing like drilling holes, cutting them and support remove.
For connecting Links and Knobs you can use parts of 1.75 mm filament.
You can use some flexible filaments to add more flexibility
Printing settings were:
-printing temperature 255 C
-heated bed 75 C
-no cooling
-glue stick applayed on bed
-slow speeds
If I forgot about somting or you just want to ask me, post a comment and I will try to answer to you.

I hope you will enjoy it
If you want you can tip this project or check out my others designs
Thanks

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: Yes

Resolution: 0.15 mm

Infill: 50%

Filament: Taulman Bridge Nylon White/ transparent