Nintendo Switch Handles (OLED VERSION)

Version for the regular Nintendo Switch available here: https://www.printables.com/model/5171-updated-nintendo-switch-handles

Update: While the original version would fit in the dock, it was a little tight and rubbed on both sides. I've added a second version that will allow the switch to be docked with the grips still attached.

I originally created the first version of this for the standard Switch because I didn't love any of the existing designs. One had seams, screw holes, and etc. Another two piece would allow the actual switch unit to fall out the bottom of the grips if you weren't careful. So I designed this and basically combined ideas from each design that I did like.

I recently updated this to fit the OLED version of the Nintendo Switch. Both versions have been tweaked for easier printing, less cleanup, and access to the SD cards.

This will fit on a 250 mm print bed if it is turned to the diagonal and get it lined up just right. See the images for the orientation I used on an MK2.5s. There is also a two piece version available for smaller printers.