Machinist Oil Pot (Magnetic Base)

Oil pot and brush holder for cutting oil or similar, there is a cut-out in the base for a retained magnet (max diameter 25 x 3 mm) which will hold the pot solidly to your machine (it does double duty collecting swarf :-)   )

Needs a pause set in slicer at 4mm height so you can insert the magnet (slide the layer selecter down to 4mm and right click, the select add pause). I added a sample gcode file to demonstrate this (0.6 nozzle PETG).

Use 3 or 4 perimeters and 6 bottom layers - try and make it a solid print.

Prints without supports.