PTFE Passthrough for Mosaic Palette 3 Pro

If you're storing your 8 filament spools for the Palette 3 Pro on different levels than your actual Palette, this accessory might fit your needs.

It is originally designed to fit into an IKEA SMÅSTAD wardrobe. But should fit any shelfes with the thickness of 22mm.
My printer sits on the top shelf. Directly below is my Palette 3 Pro and four filamentboxes on each of the last two shelfs.

The PTFE Tube Fitting is designed to fit PC4-M10 PTFE couplers and 6MM x 3MM ROUND MAGNETS. There are also SPACERS, so you dont have to attach your filament spools directly to the passthroughs and might get a cleaner look. 
All models are made to be printed without any supports. Just look for the right direction of the models.
WATCH FOR THE RIGHT MAGNET ORIENTATION

The 4 hole passthrough files are for the connection between the bottom shelf and the top shelf of the bottom part of the wardrobe.

The 8 hole passthrough files are for the connection between the top shelf of the bottom part and the botom shelf of the top part of the wardrobe.

Also take a look at my VESA Adapter for Mosaic Palette 3/3 Pro