Storage Drawer (Fits Ender 3 Pro and F3D included to easily modify)

Storage Drawer (Fits Ender 3 Pro and F3D included to easily modify)

The model is available for free download and use.

If you still want to invite me for a coffee for my effort, troubles and time, you can do it via:

https://www.paypal.com/paypalme/avicode

I saw some other drawers and storage designs - but they were all very slow and heavy to print.

So, I decided to utilize the Vase Mode to build structurally sound and fully functional drawers for Ender 3 Pro.

There were some challenges when trying to utilize Vase Mode - but with the ribbed walls and the interlocking drawer areas - I got around them.

This design works best with something like PETG that has good layer adhesion.

Nozzle should be 0.6mm or 0.8mm to make the Spiral / Vase Mode print a thicker wall.

I used 30mm mouse ears at the corners, to stop the print from warping as PETG warps a LOT when printing items like this with sharp corners.

Brims just doesn't cut it.

The mouse ears are thick for that reason.

You will just need to cut them off with a pair of scissors.

I attached a screenshot of the print settings for best results.

Thanks!