October 11, 2020
Description
Hot of the 3d printer, one custom made/designed Disney theme parks, The Haunted Mansion "Good Old Fred" Tombstone. As found, in the grounds of the Haunted Mansion ride.
Really pleased how this finally turned out, although wondering if I should of aged it a bit?
If you enjoy this one, let me know and I'll make another one from the ride grounds. Probably, "Dear Departed Brother Dave, He Chased A Bear Into A Cave". :-)
Happy Halloween Everyone
Printed in 2-parts, using the Variable Layer Height (between 0.25 and 0.01mm layers) setting in PrusaSlicer.
Headstone was printed flat to the bed and the base was printed upright. Total printing time was around 10 hours (6 hours for headstone and 4 hours for base).
The headstone then just slots into the base.
Must add, it is a tight fit. So, depending on how well your printer is calibrated you may need to sand the headstone slightly or scale the base appropriately.
Overall size when assembled is; 170mm x108.3mm x 33mm.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
9
John
