Zooz ZSE40 Mounting Bracket

This mounting bracket was made specifically for the Zooz ZSE40 z-wave 4-in-1 sensor.  This allows the sensor to be placed in the following positions:

1. Sitting on a shelf pointing upward at 45 degrees
2. Sitting on a shelf pointing sideways with additional stability
3. Using the clip, it can mount to a thin metal strip of outdoor siding or drop ceiling
4. Attached to a wall and pointing down at 45 degrees

To attach the ZSE40 to the bracket the following m5 screws were used:

https://www.printables.com/model/48364-3d-printable-m5-hex-screw-and-nut