Vuvuzela (plug and play) + Megaphone

This Vuvuzela is loud, easy to print and can be coloured in your favourite colour, also you can put a strap on it to take it on your back.

Safety first!

Do not put this Vuvuzela near another's ear! It can damage there hearing. I extra put a warning on the Model.

How to print:

You will need to print all the parts one time. Print them in the Orientation as they are.

The Mouth piece needs no support just print it.

The Center piece will need some support at the bottom. Maybe you can try arc overhang but another way you will not put them together later. But it is only a little bit support.

The end where the sound comes out. could be printed without support if your printer can handle overhangs good. But I would recommend using some support.

Build it:

It may be needed to cut the edges of your print if you have issues with elephant foots.

For assembling just put the parts together and rotate them. You should hear a little click sound. Notice that you will have to turn into different directions with the start and the end part.

You can attach a hook, carabiner or just a string to take it around your neck or on your back.

For disassemble just do everything the opposite way.

Play it:

To get a sound you need to press your lipps together and seal them with the mouth part. Then while pressing your lips together press air out between your lips. You could Probably say make a farting sound with your lips. Enjoy :D

Btw. the End Part alone you also can be use as a megaphone to cheer for your team ;)

Change Log:

V1.1

Tighter fit between the parts so they hold better

V1.2

Two slides inside insdead of one so it cannot slip out on accident.