LED "PCB" replacement for Banggood RGB LED Canton Tower top

These are a set of 5mm LED rings that I designed to replace the original top section of this 1 meter tall RGB LED tower kit ( the Banggood RGB LED Canton Tower kit. ( https://uk.banggood.com/custlink/3vKYokPDv ) )

These will mean that the tower top section will now be able to reflect the patterns of the main tower instead of just being comprised of colour-changing LEDs which just randomly change colours with no control by the MCU.

I've made a series of videos detailing the process of building this kit, here's the links:-

Part 1 - the intro and unboxing video - https://youtu.be/80xEHzgpSfw

Part 2 - building the main PCB - https://youtu.be/JvUHCe0f5CE

Part 3 - building the interconnect PCB - https://youtu.be/9cFhkjX0S_Y

Part 4 - Soldering up the LED PCB's :- https://youtu.be/c1Qd4M8edwE

Part 5 - Assembling the Tower of LEDs (where this spacer is used) :- https://youtu.be/iHrG6jx0ZJQ

Part 6 - Wiring the Tower & 1st test :- https://youtu.be/yYqN3D-mwAM

Part 7 - The Finale (or is it??) :- https://youtu.be/SD521vIF_G4

Part 8 - Demo of display modes :- https://youtu.be/h9ekcKVZD8k

Part 9a-d - using these printed LED mounts to improve the kit https://youtu.be/0zNYbZVIslQ

Part b is linked here:- https://youtu.be/_HPRaM28xxw

Part c is linked here:- https://youtu.be/0c5WLnyieqI

Part d is linked here:- https://youtu.be/8KR0p1wjV90

Print Settings

Printer Brand:

Anet

Printer:

Rafts:

No

Supports:

Resolution:

200

Infill:

Filament: Sunlu PETG white

Notes:

Category: Electronics