Hanging Granola Bar Pantry Storage and Dispenser

I designed this because I was tired of having boxes and loose granola bars in the pantry.  We were also not fully utilizing the space between racks in the pantry so I designed it to hang from the upper rack.    

It is designed to hang from the metal racking style of pantry shelving but could easily just sit on a non-metal shelf as well.  

The pictures show an earlier design that doesn't have the refill notch at the top.  The inconvenience when refilling is just not worth the filament to me to print another one.  

The fitment of the hangers is intentionally pretty tight as I wanted to ensure that they didn't slip out.  You should be able to push them through or, if needed, they can be sanded slightly.

Print settings:  

PLA works great

Container - No supports needed if you print it standing up.  There are some “designed” supports that can be broken/cut out after printing.

Left/Right Hangers - Support on build plate only

0.3mm layer height

Print with 3 perimeters and 3 top/bottom solid layers - 2 perimeters will increase print time

Container - Recommend 40% cubic infill but it doesn't really matter as the perimeter settings cancel out infill for the majority of the print.   

Left/Right Hangers - 80% cubic infill as these are load bearing