Wall Mounted Shovel Hook

Very simple wall mounted hook/hanger.  I designed this with the intent to store snow shovels on the wall in my garage but I have found that they work well to hang pretty much anything.  Shovels and other similar tools stay nearly flush with the wall.  Used two 2" decking screws into a wall stud to mount it.

Print settings:

Ensure that you print it in the orientation that it imports into the slicer.  Do not print it with the wall mount (side with two holes) on the bed.  The load bearing part will more easily break if printed in this orientation.

0.35mm layer height

Printed in PETG to ensure strength and cold/water resistance.  I'm sure PLA should work but I didn't want to risk it as these tools hang right beside our vehicles.

4 perimeters, 4 top/bottom solid layers

No supports required

75% cubic infill