Sleek Sprite Extruder Ribbon Cable Strain Relief

A new take on the ribbon cable strain relief for the Creality Sprite Extruder. ~6 grams in PETG.

See it in action here:

My print settings:

• PETG (print in the hotter range of your material for good layer adhesion, the overhangs are mild on this model)
• 0.4mm nozzle, 0.25mm layer height
• 3 walls, 4 bottom, 5 top, 30% triangular/grid infill

For those who are interested in replicating the same test, here is the Klipper test macro I used (for Ender-3 S1/S1 Pro) and my X axis limits (and you could load all the G commands in Marlin too).

[gcode_macro TEST_X]
gcode:
  G28 # Home the printer
  G0 Z100 F1200
  G0 X-8 F4800
  G4 P2000
  G0 X250 F4800
  G4 P2000
  G0 X-8 F6000
  G0 X-8 F8400
  G0 X250 F10800
  G0 X-8 F13200
  G0 X250 F15600
  G0 X-8 F18000
  G0 X250 F19200
  G0 X-8 F19200
  G0 X250 F19200
  G0 X-8 F19200
  G0 X250 F19200
  G0 X-8 F19200
  G0 X250 F19200
  G0 X-8 F19200
  G0 X110 F12600
  
[stepper_x]
step_pin: PC2
dir_pin: PB9
enable_pin: !PC3
rotation_distance: 40
microsteps: 16
endstop_pin: !PA5
position_min: -8
position_endstop: -8
position_max: 250
homing_speed: 120

If you are interested in why this probe mount exists and how it works, see https://www.printables.com/model/438224-x45-sprite-cr-touch-probe-zero-y-offset-mount-v11