Orbiter 2.0 Mount

This model allows the mounting of an Orbiter 2.0 extruder on a Voron 2.4 with a CW2 carriage. The original designs were made by Team FDM users spacelab_2021, sneakytreesnake and Jay_Flo. My modifications consist of closing unnecessary openings in the models for a more streamlined appearance and improving the fit of the parts by adding a heat set insert on the stealthburner part. This allows one to insert an M3 30 screw from the back that helps bring all the pieces together.  The downside to this is that it makes inserting the blower fan more difficult, but it can definitely be done with a little fiddling. The cable cover was also modified to fit the changes. The IGUS mount was not modified but I'm including it to provide a complete set of parts. 

In the full spirit of the Voron project, instructions are minimal to non-existent. I'm providing pictures showing where to place the heat set inserts.

I hope you find these mods useful. 

Update June 2023:

I'm uploading a mod of the stealthburner fan shroud that includes a mount for the 3DO nozzle camera. This mod includes original work from Olof Ogland.

Update February 2024:

The first few times I printed this model, I had trouble getting the parts to line up. Since then, the issue has disappeared. My parts were probably bending when printing. This means that you can use the original Stealthburner fan shroud. You will need to place the heat set insert on the back of the part called Rear_orbiter and insert the screw from the front of Front_Orbiter.