December 18, 2025
Description
My first entry in the Mini 13 Machines category, AT-ST.
I wanted to make something to highlight the versatility of the Mini 13 frame and I hope I've accomplished that.
I've added tiny, custom supports to the Left Ear and Right Ear that are easily removed.
All other parts print support free.
If printing at 100%, I would suggest printing with a brim on the ears as they are pretty delicate
It depends on how you have your AT-ST situated, but mine stands about three inches tall when printed at 100%.
I print everything with a layer height of 0.12 mm and a speed no faster than 50 mm/s. In my experience, printing any faster than that can cause the fit between parts to be too tight, sometimes to the point where they won't fit.
On top of downloading my files, you will need to download some of the Mini 13 frame parts. Below is a list of the frame parts and the amount you will need as well as a direct download link for them.
mini13-frame-head.stl x1
mini13-frame-waist.stl x1
mini13-frame-leg.stl x4
mini13-frame-arm.stl x2
mini13-frame-foot.stl x2
The “ears” are able to rotate and the “mouth” has a full range of movement as it attaches using the standard ball joint. The completed head assembly attaches to the frame the same way a regular Mini 13 head does.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Dr Operator
